Photo frame Fresh news
How to make the original photo frame with your own hands? Very simply, if You were old newspaper and old cardboard box!
Photo frame “latest news”
To make this frame You will need:
- cardboard box
- PVA glue
- glass 10x15 cm
- dummy knife
Cut the box in the corners. Draw a rectangle of 20x25 cm, step back from each edge inward by 5 cm and draw lines parallel to the sides of the rectangle. With a knife, cut out the rectangle and the hole inside it. Make two more of the same details. This is the back of the frame.
Draw a rectangle of 20x25 cm, retract by 5.5 cm, draw lines parallel to the sides of the rectangle. Cut out the rectangle and the hole in it. Make two more of the same details. This is the front of the frame.
Glue each three parts of the back of the frame. Glue the same parts the front part. Dry under pressure.
Glue both parts of the frame, dry.
Cut the newspaper into small pieces. Okleivat frame them in different directions – even newspaper pieces overlap each other, go from one side frame to the other. A good dry.
Pick one of the cut out inner rectangles so that it fits tight enough into the hole in the frame. Cut out a strip of cardboard, cut one side at an angle of 45 degrees. Attach to the standing frame and cut it so that a stable foot is obtained. Two pieces of newspaper glue the leg perpendicular to the back of the frame. Pour the cover with the foot on both sides of the newspaper. The joint of the legs and lid is strengthened in several layers. Dry it.
Insert a 10x15 cm glass into the frame and the back cover - the frame is ready.
In general, it must be borne in mind that such a photo frame can emphasize its design a snapshot, or may become its continuation.