Stopped working mouse
The computer sometimes brings serious inconvenience, but most of all, its individual elements. Let's start with the simple computer mouse. What to do if stopped working mouse.
The termination of the computer mouse it is possible to diagnose a variety of ways. but first, you must consider some points: if you find that have stopped working mouse in any case, do not disassemble it yourself. Experience suggests that there will be unnecessary details that will never be useful to you, like the mouse itself.
So, let's see what to do if stopped working the mouse :
Check the installation the driver or update it. When the mouse is first inserted into the USB connector, the computer searches for the driver. Sometimes there is an inscription: "The device is not working properly". In this case, you need to enter the "Start", then in the "Control Panel" and click the mouse icon. There you can check the state of the mouse. Perhaps, by default or by mistake installers of programs are wrong mode of the mouse. Carefully read all the signs by putting or removing the checkmarks.
If it suddenly stopped working mouse, having problems with driver installation, check the wire. To do this, ask someone to follow the cursor, and then pinch the wire gradually, observing when the contact will appear. You, of course, can tape taped the location of the rupture, but it is easier to replace the wire. It's easy and inexpensive.
Check your computer with virus scan. Often after such a check, the mouse starts to work. How do you know that viruses caused the mouse to stop working? It's very simple: connect it to several USB ports in turn. In one case, the mouse is working, but in the other it completely refuses. So it should not be, especially since you can test their performance on a regular flash drive. If it accepts, and there is no mouse, then the reason is in the device, and not in the computer.
If the mouse fell, then you found out the noise so she got serious damage. Do not disassemble it, as we have asked in the beginning. Take it to the master, he'll quickly fix it, if not injured is a very important part.
But let's try to fix it with our own hands, with minimal risk. To do this you will need a screwdriver, a knife, a 40 W soldering iron, rosin, tin and, in fact, the mouse itself.
1. Turn the device over and find the screws that are unscrewed to remove the case.
2. After removing the case, carefully examine the wires, remember them by their colors and location.
3. Carefully unpack the wiring.
4. Cut the break cord. Bending of the cord is near the place of occurrence of the cord in the mouse itself. Clean wiring and solder them back to the pins (all 4 in total).
5. Collect the mouse in the reverse order. The probability of resuming work is 99%.
In any case, if you've encountered a mouse, don't worry. Of course, working with it is much more convenient than with a key combination. Some even touch the panel do not recognize, preferring a computer mouse. Any deviation in her work, try to diagnose painlessly at home, because often problems with the computer mouse are not so serious as to immediately carry it to the master.